Karcher Pro Adapter 6 TR22IG-M22AG Easy!Lock Washer to Old High Pressure Hose

Bought a newer Easy!Lock machine but still own good hoses? The Karcher Pro Adapter 6 TR22IG-M22AG lets the two work together. It is a purpose-made adaptor for Karcher Professional users.

It sits between the Easy!Lock outlet on the washer and the older thread used on previous-generation Karcher Professional high pressure hoses. The model code tells you the layout: TR22 internal on one end and M22 external on the other.

The saving is the point. Instead of binning hoses that still work you keep them in service. Contractors with a large hose stock can move to newer machines without a full hose swap. That cuts unneeded replacement.

It is designed for Karcher Professional systems so the fit is secure. Two customers on the retailer page called it spot on and good quality. Match your hose thread before ordering. Karcher Pro covers it with its manufacturer warranty. Not sure which way round you need? This one starts at the Easy!Lock washer and ends at the old hose. It does the opposite job to Adapter 2.

Easy!Lock machines use a TR22 thread at the outlet. Older Karcher Professional hoses use an M22 thread. This adaptor has a TR22 internal thread to meet the washer and an M22 external thread to meet the hose. Real use is simple: screw it on, connect the old hose and the system seals as normal. Check both threads before ordering.

Turn the machine off and relieve pressure before swapping any fitting. Inspect the adaptor and old hose for cracks and worn threads each time. Hand tighten fully so it cannot leak under load. Replace a damaged hose rather than reuse it. Wear eye protection and never aim the lance at anyone.