Karcher Vario Joint 180 Degree Swivel Adaptor for K2 to K7 Pressure Washers

The Karcher Vario Joint is a swivel adaptor for Karcher K2 to K7 pressure washers. It rotates through 180 degrees. Use it where a straight lance will not reach. Roller shutters, car roofs and conservatories are good examples.

The joint sits between the trigger gun and your cleaning accessory. It also fits between an extension lance and the accessory. You angle the spray without twisting your body. Water pressure stays steady through the bend.

It uses the Karcher Quick Connect fitting. Changing jobs takes seconds. It suits Classic, Power Control, Full Control, Premium and Ecologic models across the K2, K3, K4, K5 and K7 ranges. Got a trigger gun made before 2010 (Gun M, 96 or 97)? You also need the separate Adapter M, part number 2.643-950.0.

Buy it if you clean high or tricky spots often. It cuts strain on your arms and back. It suits homeowners, valeters and property maintenance teams. The Quick Connect fitting makes swapping simple and the joint adds reach to kit you already own.

The joint is an articulated connector that rotates through 180 degrees. It sits in the water path between the gun and the accessory. Because the water keeps flowing through the bend, you aim the spray without losing pressure. The Quick Connect fitting is the standard Karcher K series connection. In use, that means you can reach up at a shutter or across a conservatory roof while your hands stay in a comfortable position.

Switch the machine off and release the trigger pressure before fitting the joint. Check it clicks fully home and give it a tug. Never aim the spray at people or animals. Overhead spraying can send water back at you, so wear eye protection and keep your footing steady on ladders or steps.